With the ParkMaster 3D you can now fly aerobatics outdoors just like you do indoors! Designed by world renowned R/C pilot and German Indoor Aerobatics Champion, Martin Muller, the ParkMaster is built from the ultra durable ELAPOR® foam making it tough enough for everyday flying. The PARKMASTER 3D can also be flown outdoors in moderate wind, something you can’t do with your typical indoor “foamy” models”. When built out with the optional Flight (#M999233) and Power (M#993233) the ParkMaster 3D will have all the power and control need to fly the most difficult 3D maneuvers. •Pre-fabricated molded ELAPOR® foam parts •Fully 3-D capable •Ultra Low Wing Loading •Ideal for Honing Your 3D skils Kit contents:Molded ELAPOR® parts, Carbon Fiber / Glass Filled Plastic Spars and fuselage longerons, all plastic parts required to assemble the model, small items and linkage components, decal sheet, detailed0 instructions. Now In stock Check out the Review of the ParkMaster 3D on RC Groups. Model Specifications Wing Length: 39 in. Wing Area: 450 Sq. In. Wing Loading: 6.7 oz/sq ft. Fuselage Length: 40 in. Weight (English): 21 oz. Flight Characteristics: 3D Aerobatics Target User: Intermediate Recommended Equipment Motor: 200 watt 28mm Outrunner Speed Control: 17 - 27 amp Propeller: 10 x 4.7 Battery: 3S 950mAh LiPo Servos: (4) HS-65HB or (4) HS-5065MG Receiver: Micro 05S or Mini 6S